Updates in Progress...

Which is right lnbf freq

Discussion of large prime focus satellite dishes used for C-Band signal reception.
Post Reply
mrel
Posts: 38
Joined: Mon Apr 13, 2015 5:25 am

Which is right lnbf freq

Post by mrel » Sun Aug 13, 2017 3:11 am

Hi
Have questions i notice my old lnbf output freq 950 - 1750,the Titanium output freq 950-1450 am i limit my receiver from pickup all the north american satellites.
Since i am in Honlulu,Hawaii can i pickup satellite 87west to 139 west on old lnbf, do i need freq 950- 1750?
mrel

elko
TVRO Guru
Posts: 213
Joined: Sat Aug 30, 2014 11:02 pm

Re: Which is right lnbf freq

Post by elko » Mon Aug 14, 2017 1:26 am

Most c band transponders over NA broadcast between 3.7GHz - 4.2GHz (IF is 950 - 1450). Looking at lyngsat, I think there are some transponders on ses 6 that are outside this frequency range. I see some in the 3.6GHz range and some others in the 4.5GHz range. You should be able to get the 3.6GHz ones with some attenuation, but you will need a different LNB for the upper C band (e.g. 4.5GHz).

I wouldn't sweat it unless you have some some specialized requirements. IF frequencies of 950 - 1450 or 950 - 1750 are both fine. The 950 - 1450 LNB will reject a little more out-band-noise if you are in a "noisy" RF environment.

Post Reply

Return to “Dish Antennas”