Help Actuator Houston Tracker and Monterey 100c

How do you move your dish across the satellite arc? Discuss your motorized equipment here.
Post Reply
JDavid22
TVRO Guru
TVRO Guru
Articles: 0
Posts: 35
Joined: Wed Aug 14, 2019 1:29 am
Has thanked: 13 times
Been thanked: 3 times

Help Actuator Houston Tracker and Monterey 100c

Post by JDavid22 » Wed Sep 04, 2019 3:48 pm

Could someone help me and tell me how to connect my actuator to Monterey 100c Plus?

I attach images
Attachments
20190904_121931.jpg
20190904_111711.jpg

Tags:

skink
TVRO Guru
TVRO Guru
Articles: 0
Posts: 129
Joined: Wed Nov 05, 2014 6:34 pm
Has thanked: 2 times
Been thanked: 15 times

Re: Help Actuator Houston Tracker and Monterey 100c

Post by skink » Wed Sep 04, 2019 8:13 pm

The bottom two connectors marked 36V(bottom left in the photo are for the two white wires on the actuator.The other two brown or black wires are connected to the other bank marked sensor and gnd.Clean the rust off won't hurt.

JDavid22
TVRO Guru
TVRO Guru
Articles: 0
Posts: 35
Joined: Wed Aug 14, 2019 1:29 am
Has thanked: 13 times
Been thanked: 3 times

Re: Help Actuator Houston Tracker and Monterey 100c

Post by JDavid22 » Wed Sep 04, 2019 11:27 pm

Thanks tomorrow I start making the connections, this actuator was given to me, it shows in "good condition" later I tell you my results. I am very grateful.

Post Reply

Return to “Actuators/Motors”