Need help in programming my X2 xsquare, jynxbox ultra hd v4pro, I-link IS-9000 plus

Discuss satellite receivers and their performance.
Post Reply
Jamaikon
TVRO Member
TVRO Member
Articles: 0
Posts: 5
Joined: Tue Mar 27, 2018 10:56 am

Need help in programming my X2 xsquare, jynxbox ultra hd v4pro, I-link IS-9000 plus

Post by Jamaikon » Sat Mar 31, 2018 1:31 pm

I am looking to set up my fta’s with the latest bin files. I am a newbie to the satellite world.

Arion
TVRO Guru
TVRO Guru
Articles: 0
Posts: 150
Joined: Wed Oct 11, 2017 6:05 pm
Been thanked: 8 times

Re: Need help in programming my X2 xsquare, jynxbox ultra hd v4pro, I-link IS-9000 plus

Post by Arion » Sat Mar 31, 2018 2:55 pm

Bin files usually refer to card sharing or pirating which isn't allowed on this forum.
10' Tek C-band dish, 1.2 meter KU band dish, ASC1 mover, Octagon/Zgemma/Edison dual band STB's. Running OpenPli on all.

Jamaikon
TVRO Member
TVRO Member
Articles: 0
Posts: 5
Joined: Tue Mar 27, 2018 10:56 am

Re: Need help in programming my X2 xsquare, jynxbox ultra hd v4pro, I-link IS-9000 plus

Post by Jamaikon » Sat Mar 31, 2018 5:15 pm

Don’t you have to program your receiver in order to view free to air channels at least that’s what I have been told.

norman881
TVRO Guru
TVRO Guru
Articles: 0
Posts: 61
Joined: Thu Nov 27, 2014 8:55 am
Location: Eastern Washington

Re: Need help in programming my X2 xsquare, jynxbox ultra hd v4pro, I-link IS-9000 plus

Post by norman881 » Sun Apr 01, 2018 8:40 am

No, you just need to point to a satellite and do a blind scan.
10 FT Winegard Pinnacle w/Venture 36" Maxie Heavy Duty Ball Screw Actuator 90 cm Fortec w/DG380 and Avenger PLL LNBF Amiko HD265 & Edision OS Mio 4K Titanium ASC1 Controller & C1 PLL LNBF

Jamaikon
TVRO Member
TVRO Member
Articles: 0
Posts: 5
Joined: Tue Mar 27, 2018 10:56 am

Re: Need help in programming my X2 xsquare, jynxbox ultra hd v4pro, I-link IS-9000 plus

Post by Jamaikon » Sun Apr 01, 2018 9:08 am

So ok what’s the purpose of installing bin files into your fta box?

LATINOTV
TVRO Guru
TVRO Guru
Articles: 0
Posts: 14
Joined: Mon Aug 29, 2016 8:41 pm

Re: Need help in programming my X2 xsquare, jynxbox ultra hd v4pro, I-link IS-9000 plus

Post by LATINOTV » Sun Apr 01, 2018 3:25 pm

THIS NOT A IKS OR IPTV FORUM

User avatar
tvroadmin
TVRO Administrator
TVRO Administrator
Articles: 1
Posts: 765
Joined: Sat Mar 01, 2014 1:00 am
Has thanked: 9 times
Been thanked: 29 times

Re: Need help in programming my X2 xsquare, jynxbox ultra hd v4pro, I-link IS-9000 plus

Post by tvroadmin » Mon Apr 02, 2018 5:03 am

Jamaikon,

You need a standard 'DVB-S2' receiver to watch FTA programming on the C and Ku bands. Our sponsors sell them and a popular 4K receiver at this time is the ZGemma:

http://www.tek2000.com/cgi-bin/web.cgi? ... H7 UHD-ND


The receiver comes pre-programmed with all the unscrambled channels available over Canada, USA, Mexico and Latin America.
Administrator
()

Post Reply

Return to “Satellite Receivers”