Cisco D9824 - working with MPE output/transport stream/MOIP

Discussions, tools and files related to all other receivers.
Post Reply
pete
New Member
New Member
Articles: 0
Posts: 1
Joined: Fri May 21, 2021 12:37 pm

Cisco D9824 - working with MPE output/transport stream/MOIP

Post by pete » Wed May 26, 2021 12:23 pm

Hi All-

Great forum. The dish setup guide was my bible and got me from knowing nothing to "successfully way over my head"! In that vain I was hoping one of the pros on here might be able to help me out:

I have a D9824 sat receiver with two MPE output ethernet jacks. The ultimate goal is to use this to view content from a remote location, but for now I'm just trying to view a single channel via direct connection to a laptop. I've set the IP on the receiver, dropped all channels except the test channel, set content to passthrough, tried both UDP and RTP, and essentially tried every combination of settings I can think of....but with no success using VLC to view the transport stream. Anyone familiar with TSoIP and know what I'm missing or have a suggestion for what I should try next? (I should note that the receiver/satellite work and I can view content via coax to TV).

Thanks everyone

Post Reply

Return to “All Other Receivers”