My C Band Zgemma h7 Settings

Discussions, tools and files related to ZGemma.
Post Reply
User avatar
HappySatellite
TVRO Guru
TVRO Guru
Articles: 0
Posts: 122
Joined: Thu Aug 24, 2017 5:16 pm
Has thanked: 34 times
Been thanked: 22 times

My C Band Zgemma h7 Settings

Post by HappySatellite » Sun Nov 04, 2018 1:08 pm

This is showing how I have my satellite settings on my dishes thought my receiver hopefully this can help you if you are having trouble setting up your dish.


[youtube]MxmdGxevG_g[/youtube]

StevenD1971
TVRO Guru
TVRO Guru
Articles: 0
Posts: 13
Joined: Sun Oct 14, 2018 1:45 pm

Re: My C Band Zgemma h7 Settings

Post by StevenD1971 » Sun Nov 04, 2018 2:46 pm

Thanks for the video.
I don't have a youtube account so I'll comment here.

You show for KU Band standard 10750 Lo LNB you are useing
LOF/L 9750
LOF/H 10750
Threshold 11700

The Correct settings for enigma 2 and a standard 10750 Lo LNB is
Type of LNB/Device = Circular LNB
voltage Mode = Polarization
Tone mode = Band
Set up the DiSEqC mode and port if used and you will be good.
If you want to use the user defined make the settings
LOF/L 10750
LOF/H 10750
Threshold 10750
And if ever do use a true circular KU Band LNB with enigma 2 use user defined settings
LOF/L 11250
LOF/H 11250
Threshold 11250

User avatar
HappySatellite
TVRO Guru
TVRO Guru
Articles: 0
Posts: 122
Joined: Thu Aug 24, 2017 5:16 pm
Has thanked: 34 times
Been thanked: 22 times

Re: My C Band Zgemma h7 Settings

Post by HappySatellite » Sun Nov 04, 2018 3:50 pm

I will try that on the Ku side. I have it that way because it worked for my ku lnb's

StevenD1971
TVRO Guru
TVRO Guru
Articles: 0
Posts: 13
Joined: Sun Oct 14, 2018 1:45 pm

Re: My C Band Zgemma h7 Settings

Post by StevenD1971 » Sun Nov 04, 2018 5:01 pm

Well you wont have a problem with the Zgemma with those incorrect settings unless you do a blind scan. You would get some channels scanned with incorrect frequencies. I just wanted to give you the correct settings for a standard KU band 10750 Lo LNB with enigma2.

supwiddiss
TVRO Agitator
Articles: 0
Posts: 44
Joined: Thu Sep 20, 2018 8:51 pm

Re: My C Band Zgemma h7 Settings

Post by supwiddiss » Thu Nov 08, 2018 7:46 am

Your Tone Mode Band toggle setting. Is your C band INB polarity tone or voltage controlled?
I have a Titanium C2. It's voltage switched. When Band is set to on, no channels found.
So mine stays off.

StevenD1971
TVRO Guru
TVRO Guru
Articles: 0
Posts: 13
Joined: Sun Oct 14, 2018 1:45 pm

Re: My C Band Zgemma h7 Settings

Post by StevenD1971 » Mon Dec 17, 2018 7:42 am

StevenD1971 wrote:
Sun Nov 04, 2018 2:46 pm
Thanks for the video.
I don't have a youtube account so I'll comment here.

You show for KU Band standard 10750 Lo LNB you are useing
LOF/L 9750
LOF/H 10750
Threshold 11700

The Correct settings for enigma 2 and a standard 10750 Lo LNB is
Type of LNB/Device = Circular LNB
voltage Mode = Polarization
Tone mode = Band
Set up the DiSEqC mode and port if used and you will be good.
If you want to use the user defined make the settings
LOF/L 10750
LOF/H 10750
Threshold 10750
And if ever do use a true circular KU Band LNB with enigma 2 use user defined settings
LOF/L 11250
LOF/H 11250
Threshold 11250
Some updated info.
From what I read some E2 teams are getting away from the circular setting for the 10750 LO lnb and the blindscan plugin has been updated for the use of user defined setting with the standard 10750 Lo ku lnb.
Use this only from now on is what I been told.
LOF/L 10750
LOF/H 10750
Threshold 10750
Tone off unless you use a 22kz switch turned on the ku side.

Post Reply

Return to “ZGemma”