103W
12080 H
30000
Audio but no video for me. Thought they might have gone BISS, but TSReader shows them fine. Have these gone 4.2.2/h.264 like CBS? Anyone picking them up?
Has NBC news gone to 4.2.2?
-
- TVRO Guru
- Articles: 0
- Posts: 129
- Joined: Wed Nov 05, 2014 6:34 pm
- Has thanked: 2 times
- Been thanked: 15 times
Re: Has NBC news gone to 4.2.2?
Someone was posting the same problem on Rick's and I think they mentioned the software in the receiver which could be the same as your own.It might be the openpli software?He has the same 4K receiver you have.
-
- TVRO Guru
- Articles: 0
- Posts: 217
- Joined: Wed Oct 11, 2017 6:05 pm
- Has thanked: 3 times
- Been thanked: 29 times
Re: Has NBC news gone to 4.2.2?
That's me. Running the Zgemma with OpenPLI 6.2 test release. The 12111 H 14500 which is the other mux with the NBC feeds is still working just fine. Both transponders are 8-psk and 5/6 fec. But when I look at the service information on the 12111 transponder it shows the AVC codec for video. When I go to the 12080 transponder and pull up the service information it shows no video codec....only audio. For some reason the Zgemma isn't picking that up out of the stream. And even with using the channel editor I don't see an area to force it to use the AVC codec manually so not sure what is going on. I'm 'assuming' that it's related to the test release somehow as it was working just fine a few weeks ago and most other people are still getting it fine. I don't have a windows computer anymore to run my genpix on or I'd fire up Tsreader and see if there are any anomalies in the stream and compare the two.
10' Tek C-band dish, 1.2 meter KU band dish, ASC1 mover, Octagon/Zgemma/Edison dual band STB's. Running OpenPli on all.
Re: Has NBC news gone to 4.2.2?
Nope H.264. If it were 4:2:2 TSR would not display video thumbnails. I get video thumbnails with TSR. I can send it through VLC as well. But, the info under the video is very bare. Lots of info missing. That might be messing up things.